Professional Design Sfp Module Mm - 100BASE-FX SFP 1310nm 2km Hi-Optel HSFP-03-3312M-22F module – Hi-optel
Professional Design Sfp Module Mm - 100BASE-FX SFP 1310nm 2km Hi-Optel HSFP-03-3312M-22F module – Hi-optel Detail:
Features
● Compliant with ITU-T G.957,G.958
● Multi-Source Package with Duplex LC Connector
● Up to 155Mb/s Data Rate
● 1310nm FP Single-Mode
● Single +3.3V Power Supply
● Hot-Pluggable
● Eye Safety Designed to Meet Laser Class1, Compliant with IEC60825-1
● RoHS Compliant Products
Pin Description
|
Pin |
Symbol |
Name/Description |
Ref |
|
1 |
VEET |
Transmitter Ground(Common with Receiver Ground) |
1 |
|
2 |
TFAULT |
Transmitter Fault.Low normal operation,High Fault indication | |
|
3 |
TDIS |
Transmitter Disable.Laser output disabled on high or open |
2 |
|
4 |
MOD_DEF(2) |
Module Definition 2.Data line for Serial ID |
3 |
|
5 |
MOD_DEF(1) |
Module Definition 1.Clock line for Serial ID |
3 |
|
6 |
MOD_DEF(0) |
Module Definition 0.Grounded within the moudle |
3 |
|
7 |
Rate Select |
No connection required | |
|
8 |
LOS |
Loss of Signal indication.Logic 0 indicates normal operation. |
4 |
|
9 |
VEER |
Receiver Ground(Common with Transmitter Ground) |
1 |
|
10 |
VEER |
Receiver Ground(Common with Transmitter Ground) |
1 |
|
11 |
VEER |
Receiver Ground(Common with Transmitter Ground) |
1 |
|
12 |
RD- |
Receiver Inverted DATA out.AC Coupled | |
|
13 |
RD+ |
Receiver Non-inverted DATA out.AC Coupled | |
|
14 |
VEER |
Receiver Ground(Common with Transmitter Ground) |
1 |
|
15 |
VCCR |
Receiver Power Supply | |
|
16 |
VCCT |
Transmitter Power Supply | |
|
17 |
VEET |
Transmitter Ground(Common with Receiver Ground) |
1 |
|
18 |
TD+ |
Transmitter Non-inverted DATA in.AC Coupled | |
|
19 |
TD- |
Transmitter Inverted DATA in.AC Coupled | |
|
20 |
VEET |
Transmitter Ground(Common with Receiver Ground) |
1 |
Notes:
1. Circuit ground is internally isolated from chassis ground.
2. Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
3. Should be pulled up with 4.7k – 10kohms on host board to a voltage between 2.0V and 3.6V.
MOD_DEF(0) pulls line low to indicate module is plugged in.
4. LOS is open collector output. Should be pulled up with 4.7k – 10kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
Product detail pictures:
Related Product Guide:
To continually enhance the management technique by virtue of your rule of "sincerely, great faith and high-quality are the base of company development", we widely absorb the essence of similar merchandise internationally, and continuously build new merchandise to meet the demands of customers for Professional Design Sfp Module Mm - 100BASE-FX SFP 1310nm 2km Hi-Optel HSFP-03-3312M-22F module – Hi-optel , The product will supply to all over the world, such as: Zambia, Boston, British, Our faith is to be honest first, so we just supply high quality products to our customers. Really hope that we can be business partners. We believe that we can establish long time business relationship with each other. You can contact us freely for more information and pricelist of our products ! You will be Unique with our hair products !!
By Elaine from Nairobi - 2017.11.29 11:09
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Mona from Namibia - 2018.09.21 11:01
