Factory supplied Gigabit Fiber Sfp - 2.5GBASE-BX SFP 1550nm-TX 1310nm-RX 10km Hi-Optel HWTR-48-253278233F module – Hi-optel
Factory supplied Gigabit Fiber Sfp - 2.5GBASE-BX SFP 1550nm-TX 1310nm-RX 10km Hi-Optel HWTR-48-253278233F module – Hi-optel Detail:
Features
● SFP Multi-source Package with SC Receptacle
● Up to 2.5Gb/s Data Links
● Up to 20km on 9/125µm SMF
● Single +3.3V Power Supply
● Hot-Pluggable
● Compliant with ITU-T G.957
● Eye Safety Designed to Meet Laser Class1, Compliant with IEC60825
● Compliant with Bellcore TA-NWT-000983
● Compliant with SFP MSA Specification
● Operating Case Temperature
Industrial:-40℃~+85℃
● RoHS Compliant Products
Pin Description
|
Pin |
Symbol |
Name/Description |
Ref |
|
1 |
VEET |
Transmitter Ground(Common with Receiver Ground) |
1 |
|
2 |
TFAULT |
Transmitter Fault.Low normal operation,High Fault indication |
|
|
3 |
TDIS |
Transmitter Disable.Laser output disabled on high or open |
2 |
|
4 |
MOD_DEF(2) |
Module Definition 2.Data line for Serial ID |
3 |
|
5 |
MOD_DEF(1) |
Module Definition 1.Clock line for Serial ID |
3 |
|
6 |
MOD_DEF(0) |
Module Definition 0.Grounded within the moudle |
3 |
|
7 |
Rate Select |
No connection required |
|
|
8 |
LOS |
Loss of Signal indication.Logic 0 indicates normal operation. |
4 |
|
9 |
VEER |
Receiver Ground(Common with Transmitter Ground) |
1 |
|
10 |
VEER |
Receiver Ground(Common with Transmitter Ground) |
1 |
|
11 |
VEER |
Receiver Ground(Common with Transmitter Ground) |
1 |
|
12 |
RD- |
Receiver Inverted DATA out.AC Coupled |
|
|
13 |
RD+ |
Receiver Non-inverted DATA out.AC Coupled |
|
|
14 |
VEER |
Receiver Ground(Common with Transmitter Ground) |
1 |
|
15 |
VCCR |
Receiver Power Supply |
|
|
16 |
VCCT |
Transmitter Power Supply |
|
|
17 |
VEET |
Transmitter Ground(Common with Receiver Ground) |
1 |
|
18 |
TD+ |
Transmitter Non-inverted DATA in.AC Coupled |
|
|
19 |
TD- |
Transmitter Inverted DATA in.AC Coupled |
|
|
20 |
VEET |
Transmitter Ground(Common with Receiver Ground) |
1 |
Notes:
1. Circuit ground is internally isolated from chassis ground.
2. Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
3. Should be pulled up with 4.7k – 10kohms on host board to a voltage between 2.0V and 3.6V.
MOD_DEF(0) pulls line low to indicate module is plugged in.
4. LOS is open collector output. Should be pulled up with 4.7k – 10kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
Product detail pictures:
Related Product Guide:
We attempt for excellence, support the customers", hopes to become the top cooperation team and dominator enterprise for staff, suppliers and shoppers, realizes worth share and continual marketing for Factory supplied Gigabit Fiber Sfp - 2.5GBASE-BX SFP 1550nm-TX 1310nm-RX 10km Hi-Optel HWTR-48-253278233F module – Hi-optel , The product will supply to all over the world, such as: Azerbaijan, Kenya, Roman, We are committed to meet all your needs and solve any technical problems you may encounter with your industrial components. Our exceptional products and vast knowledge of technology makes us the preferred choice for our customers.
By mary rash from Slovakia - 2018.12.30 10:21
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Kelly from Norwegian - 2017.12.19 11:10
