Factory Supply Sfp Module Cable - 100BASE-FX SFP 1310nm 2km Hi-Optel HSFP-03-3312M-22F module – Hi-optel

Short Description:

Product Detail

Product Tags

Feedback (2)

It can be our duty to satisfy your preferences and successfully serve you. Your pleasure is our best reward. We have been looking forward to the go to for joint expansion for Sfp Port Module , Transceiver Rj45 , Sfp Bidi 20km , Our final target is "To consider the most effective, To be the Best". Please experience cost-free to call with us if you have any prerequisites.

Factory Supply Sfp Module Cable - 100BASE-FX SFP 1310nm 2km Hi-Optel HSFP-03-3312M-22F module – Hi-optel Detail:

Features

● Compliant with ITU-T G.957,G.958
● Multi-Source Package with Duplex LC Connector
● Up to 155Mb/s Data Rate
● 1310nm FP Single-Mode
● Single +3.3V Power Supply
● Hot-Pluggable
● Eye Safety Designed to Meet Laser Class1, Compliant with IEC60825-1
● RoHS Compliant Products

Pin Description

Pin	Symbol	Name/Description	Ref
1	V_EET	Transmitter Ground(Common with Receiver Ground)	1
2	T_FAULT	Transmitter Fault.Low normal operation,High Fault indication
3	T_DIS	Transmitter Disable.Laser output disabled on high or open	2
4	MOD_DEF(2)	Module Definition 2.Data line for Serial ID	3
5	MOD_DEF(1)	Module Definition 1.Clock line for Serial ID	3
6	MOD_DEF(0)	Module Definition 0.Grounded within the moudle	3
7	Rate Select	No connection required
8	LOS	Loss of Signal indication.Logic 0 indicates normal operation.	4
9	V_EER	Receiver Ground(Common with Transmitter Ground)	1
10	V_EER	Receiver Ground(Common with Transmitter Ground)	1
11	V_EER	Receiver Ground(Common with Transmitter Ground)	1
12	RD-	Receiver Inverted DATA out.AC Coupled
13	RD+	Receiver Non-inverted DATA out.AC Coupled
14	V_EER	Receiver Ground(Common with Transmitter Ground)	1
15	V_CCR	Receiver Power Supply
16	V_CCT	Transmitter Power Supply
17	V_EET	Transmitter Ground(Common with Receiver Ground)	1
18	TD+	Transmitter Non-inverted DATA in.AC Coupled
19	TD-	Transmitter Inverted DATA in.AC Coupled
20	V_EET	Transmitter Ground(Common with Receiver Ground)	1

Notes:
1. Circuit ground is internally isolated from chassis ground.
2. Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
3. Should be pulled up with 4.7k – 10kohms on host board to a voltage between 2.0V and 3.6V.
MOD_DEF(0) pulls line low to indicate module is plugged in.
4. LOS is open collector output. Should be pulled up with 4.7k – 10kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.

Product detail pictures:

Related Product Guide:

Assume full accountability to satisfy all demands of our consumers; reach ongoing advancements by endorsing the expansion of our purchasers; come to be the final permanent cooperative partner of clients and maximize the interests of clientele for Factory Supply Sfp Module Cable - 100BASE-FX SFP 1310nm 2km Hi-Optel HSFP-03-3312M-22F module – Hi-optel , The product will supply to all over the world, such as: Angola, Spain, Indonesia, With the goal of "zero defect". To care for the environment, and social returns, care employee social responsibility as own duty. We welcome friends from all over the world to visit and guide us so that we can achieve the win-win goal together.

1.25g Sfp