Manufactur standard Sfp Module Switch - 100BASE-SX SFP 850nm 2km Hi-Optel HSFP-03-3831M-22F module – Hi-optel
Manufactur standard Sfp Module Switch - 100BASE-SX SFP 850nm 2km Hi-Optel HSFP-03-3831M-22F module – Hi-optel Detail:
Features
● Multi-Source Package with Duplex LC Connector
● Single +3.3V Power Supply
● Hot-Pluggable
● Up to155Mb/s Data Links
● Up to 2Km on 50/125µm MMF
Up to 1Km on 62.5/125µm MMF
● Eye Safety Designed to Meet Laser Class1, Compliant with IEC60825
● Compliant with Bellcore TA-NWT-000983
● Monitoring Interface Compliant with SFF-8472
● Operating Case Temperature
Standard(X=1):0℃~+70℃
Industrial(X=2):-40℃~+85℃
● RoHS Compliant Products
Specification
Electrical and Optical Characteristics: (Condition: Ta=TOP)
| Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
| Transmitter Differential Input Volt |
+/-TX_DAT |
200 |
2400 |
mV p-p |
|
| Supply Current |
ICC |
130 |
300 |
mA |
|
| Tx_Disable Input Voltage – Low |
VIL |
0 |
0.8 |
V |
|
| Tx_Disable Input Voltage – High |
VIH |
2.0 |
Vcc |
V |
|
| Tx_Fault Output Voltage – Low |
VOL |
0 |
0.8 |
V |
|
| Tx_Fault Output Voltage – High |
VOH |
2.0 |
Vcc |
V |
|
| Receiver Differential Output Volt |
+/-RX_DAT |
400 |
1400 |
mV p-p |
|
| Rx_LOS Output Voltage- Low |
VOL |
0 |
0.8 |
V |
|
| Rx_LOS Output Voltage- High |
VOH |
2.0 |
Vcc |
V |
Transmitter:
|
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
| Data Rate |
B |
- |
155 |
- |
Mb/s |
| Centre Wavelength |
λc |
830 |
850 |
860 |
nm |
|
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
| Output Spectral Width(RMS) |
△λ |
- |
- |
0.85 |
nm |
| Average Output Power*Note1 |
Po |
-9.5 |
- |
-3 |
dBm |
| Extinction Ratio*Note2 |
E.R. |
8.2 |
- |
- |
dB |
| Supply Current |
ICC |
- |
70 |
180 |
mA |
| Rise and Fall Time (20~80%) |
Tr |
- |
|
2 |
ns |
| Average Output Power@TX_DISABLE |
Po_dis |
|
|
-45 |
dBm |
| Output Optical Eye |
Compliant with ITU-T G.957 |
||||
Receiver:
| Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
| Date Rate |
B |
100 |
155 |
- |
Mb/s |
| Receive Sensitivity*Note3 |
Pmin |
- |
- |
-17 |
dBm |
| Maximum Input Power |
Pmax |
-3 |
- |
- |
dBm |
| Signal Detect Threshold-De-Assert |
SD |
|
|
-19 |
dBm |
| Signal Detect Threshold-Assert |
SA |
-45 |
|
|
dBm |
| Hysteresis |
- |
|
2.0 |
|
dB |
| Supply Current |
ICC |
- |
60 |
120 |
mA |
| Operating Wavelength |
λc |
760 |
- |
860 |
nm |
| Alarm Output Interface |
LVTTL |
||||
Note1: Measured with 62.5/125µm multi-mode fiber.
Note2: Filtered, measured with a PRBS 2^23-1 test pattern @155Mbps.
Note3: Measured with ER=8.2dB, 2^23-1 PRBS data pattern, BER≤1E-12.
Product detail pictures:
Related Product Guide:
Our solutions are widely recognized and trusted by consumers and will meet up with constantly developing financial and social requires for Manufactur standard Sfp Module Switch - 100BASE-SX SFP 850nm 2km Hi-Optel HSFP-03-3831M-22F module – Hi-optel , The product will supply to all over the world, such as: venezuela, Japan, Azerbaijan, Only for accomplishing the good-quality product to meet customer's demand, all of our products have been strictly inspected before shipment. We always think about the question on the side of the customers, because you win, we win!
By Cornelia from Israel - 2018.07.26 16:51
Production management mechanism is completed, quality is guaranteed, high credibility and service let the cooperation is easy, perfect!
By Chris Fountas from Honduras - 2018.07.27 12:26
