Newly Arrival Sfp Module Lc - 100BASE-FX SFP 1310nm 2km Hi-Optel HSFP-03-3312M-22F module – Hi-optel
Newly Arrival Sfp Module Lc - 100BASE-FX SFP 1310nm 2km Hi-Optel HSFP-03-3312M-22F module – Hi-optel Detail:
Features
● Compliant with ITU-T G.957,G.958
● Multi-Source Package with Duplex LC Connector
● Up to 155Mb/s Data Rate
● 1310nm FP Single-Mode
● Single +3.3V Power Supply
● Hot-Pluggable
● Eye Safety Designed to Meet Laser Class1, Compliant with IEC60825-1
● RoHS Compliant Products
Pin Description
|
Pin |
Symbol |
Name/Description |
Ref |
|
1 |
VEET |
Transmitter Ground(Common with Receiver Ground) |
1 |
|
2 |
TFAULT |
Transmitter Fault.Low normal operation,High Fault indication | |
|
3 |
TDIS |
Transmitter Disable.Laser output disabled on high or open |
2 |
|
4 |
MOD_DEF(2) |
Module Definition 2.Data line for Serial ID |
3 |
|
5 |
MOD_DEF(1) |
Module Definition 1.Clock line for Serial ID |
3 |
|
6 |
MOD_DEF(0) |
Module Definition 0.Grounded within the moudle |
3 |
|
7 |
Rate Select |
No connection required | |
|
8 |
LOS |
Loss of Signal indication.Logic 0 indicates normal operation. |
4 |
|
9 |
VEER |
Receiver Ground(Common with Transmitter Ground) |
1 |
|
10 |
VEER |
Receiver Ground(Common with Transmitter Ground) |
1 |
|
11 |
VEER |
Receiver Ground(Common with Transmitter Ground) |
1 |
|
12 |
RD- |
Receiver Inverted DATA out.AC Coupled | |
|
13 |
RD+ |
Receiver Non-inverted DATA out.AC Coupled | |
|
14 |
VEER |
Receiver Ground(Common with Transmitter Ground) |
1 |
|
15 |
VCCR |
Receiver Power Supply | |
|
16 |
VCCT |
Transmitter Power Supply | |
|
17 |
VEET |
Transmitter Ground(Common with Receiver Ground) |
1 |
|
18 |
TD+ |
Transmitter Non-inverted DATA in.AC Coupled | |
|
19 |
TD- |
Transmitter Inverted DATA in.AC Coupled | |
|
20 |
VEET |
Transmitter Ground(Common with Receiver Ground) |
1 |
Notes:
1. Circuit ground is internally isolated from chassis ground.
2. Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V.
3. Should be pulled up with 4.7k – 10kohms on host board to a voltage between 2.0V and 3.6V.
MOD_DEF(0) pulls line low to indicate module is plugged in.
4. LOS is open collector output. Should be pulled up with 4.7k – 10kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.
Product detail pictures:
Related Product Guide:
We strive for excellence, service the customers", hopes to become the best cooperation team and dominator enterprise for personnel, suppliers and customers, realizes value share and continuous promotion for Newly Arrival Sfp Module Lc - 100BASE-FX SFP 1310nm 2km Hi-Optel HSFP-03-3312M-22F module – Hi-optel , The product will supply to all over the world, such as: Cologne, kazan, Pretoria, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.
By Sophia from Colombia - 2018.06.26 19:27
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Sandra from Kuwait - 2017.02.18 15:54
