One of Hottest for Sfp Utp Transceiver - 100BASE-BX SFP 1550nm-TX 1310nm-RX 10km Hi-Optel HWTR-03-353178233F module – Hi-optel
One of Hottest for Sfp Utp Transceiver - 100BASE-BX SFP 1550nm-TX 1310nm-RX 10km Hi-Optel HWTR-03-353178233F module – Hi-optel Detail:
Features
● SFP Multi-source Package with LC Receptacle
● Up to 155Mb/s Data Links
● Single +3.3V Power Supply
● Hot-Pluggable
● Eye Safety Designed to Meet Laser Class1, Compliant with IEC60825
● Monitoring Interface Compliant with SFF-8472
● Compliant with Bellcore TA-NWT-000983
● Operating Case Temperature
Standard(X=1):0℃~+70℃ Up to 20km on 9/125µm SMF
Industrial(X=2):-40℃~+85℃ Up to 10km on 9/125µm SMF
● RoHS Compliant Products
Specification
Electrical and Optical Characteristics: (Condition: Ta=TOP)
| Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
| Transmitter Differential Input Volt |
+/-TX_DAT |
200 |
2400 |
mV p-p |
|
| Supply Current |
ICC |
150 |
350 |
mA |
|
| Tx_Disable Input Voltage – Low |
VIL |
0 |
0.8 |
V |
|
| Tx_Disable Input Voltage – High |
VIH |
2.0 |
Vcc |
V |
|
| Tx_Fault Output Voltage – Low |
VOL |
0 |
0.8 |
V |
|
| Tx_Fault Output Voltage – High |
VOH |
2.0 |
Vcc |
V |
|
| Receiver Differential Output Volt |
+/-RX_DAT |
400 |
1400 |
mV p-p |
|
| Rx_LOS Output Voltage- Low |
VOL |
0 |
0.8 |
V |
|
| Rx_LOS Output Voltage- High |
VOH |
2.0 |
Vcc |
V |
Transmitter:
|
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
| Data Rate |
B |
- |
155 |
- |
Mb/s |
| Centre Wavelength |
λc |
1480 |
1550 |
1600 |
nm |
| Output Spectral Width(RMS) |
△λ |
- |
- |
4 |
nm |
|
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
| Average Output Power*Note1 |
Po |
-15 |
- |
-8 |
dBm |
| Extinction Ratio*Note2 |
E.R. |
8.2 |
- |
- |
dB |
| Supply Current |
ICC |
- |
100 |
230 |
mA |
| Average Output Power@TX_DISABLE |
Po_dis |
-45 |
dBm |
||
| Output Optical Eye |
Compliant with ITU-T G.957 |
||||
Receiver:
| Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
| Date Rate |
B |
- |
155 |
- |
Mb/s |
| Receive Sensitivity*Note3 |
Pmin |
- |
- |
-28 |
dBm |
| Maximum Input Power |
Pmax |
-8 |
- |
- |
dBm |
| Signal Detect Threshold-De-Assert |
SD |
|
|
-30 |
dBm |
| Signal Detect Threshold-Assert |
SA |
-45 |
|
|
dBm |
| Hysteresis |
- |
|
2.0 |
|
dB |
| Reflection |
- |
- |
- |
-27 |
dB |
| Supply Current |
ICC |
- |
50 |
120 |
mA |
| Operating Wavelength |
λc |
1260 |
1310 |
1360 |
nm |
Note1: Measured with 9/125µm single-mode fiber.
Note2: Filtered, measured with a PRBS 2^23-1 test pattern @155Mbps.
Note3: Measured with ER=8.2dB, 2^23-1 PRBS data pattern, BER≤1E-12.
Product detail pictures:
Related Product Guide:
With state-of-the-art technologies and facilities, strict good quality regulate, reasonable cost, exceptional assistance and close co-operation with prospects, we're devoted to supplying the top benefit for our customers for One of Hottest for Sfp Utp Transceiver - 100BASE-BX SFP 1550nm-TX 1310nm-RX 10km Hi-Optel HWTR-03-353178233F module – Hi-optel , The product will supply to all over the world, such as: Sevilla, Sweden, Georgia, We welcome you to visit our company and factory. It is also convenient to visit our website. Our sales team will offer you the best service. If you need more information, please feel free to contact us by E-mail or telephone. We are sincerely hope to establish a good long-term business relationship with you through this opportunity, based on equal, mutual benefit from now till the future.
By Gary from Jeddah - 2018.12.11 14:13
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
By Adam from Turkey - 2017.09.29 11:19
