Original Factory Fibre Sfp Transceiver Modules - 100BASE-EX SFP 1310nm 40km Hi-Optel HSFP-03-1312S-22F module – Hi-optel
Original Factory Fibre Sfp Transceiver Modules - 100BASE-EX SFP 1310nm 40km Hi-Optel HSFP-03-1312S-22F module – Hi-optel Detail:
Features
● Compliant with ITU-T G.957,G.958
● Multi-Source Package with Duplex LC Connector
● Up to 155Mb/s Data Rate
● 1310nm FP Single-Mode
● Single +3.3V Power Supply
● Hot-Pluggable
● Eye Safety Designed to Meet Laser Class1, Compliant with IEC60825-1
● RoHS Compliant Products
Specification
Absolute Maximum Ratings: (TC=25℃)
| Parameter |
Symbol |
Remarks |
Min. |
Max. |
Unit |
| Storage Temperature |
TST |
- |
-40 |
+85 |
℃ |
| Operating Temperature |
TIP |
X=1 |
0 |
+70 |
℃ |
|
X=2 |
-40 |
+85 |
℃ |
||
| Input Voltage |
TCC |
- |
0 |
+5 |
V |
Recommended Operating Environment
| Parameter |
Symbol |
Remarks |
Min. |
Typical |
Max. |
Unit |
|
|
Supply Voltage |
VCC |
- |
+3.0 |
+3.3 |
+3.6 |
V |
|
| Operating Temperature |
TOP |
X=1 |
0 |
- |
+70 |
℃ |
|
|
X=2 |
-40 |
- |
+85 |
℃ |
|||
Timing Characteristics
| Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
|
TX_DISABLE Assert Time |
t_off |
3 |
10 |
usec |
|
| TX_DISABLE Negate Time |
t_on |
0.5 |
1 |
msec |
|
| Time to Initialize Include Reset of TX_FAULT |
t_int |
30 |
300 |
msec |
|
| TX_FAULT from Fault to Assertion |
t_fault |
20 |
100 |
usec |
|
| TX_DISBEL Time to Start Reset |
t_reset |
10 |
usec |
||
| Receiver Loss of Signal Assert Time (Off to On) |
TA,RX_LOS |
100 |
usec |
||
| Receiver Loss of Signal Assert Time (On to Off) |
Td,RX_LOS |
100 |
usec |
Product detail pictures:
Related Product Guide:
We aim to find out high quality disfigurement in the generation and provide the most effective services to domestic and abroad clients wholeheartedly for Original Factory Fibre Sfp Transceiver Modules - 100BASE-EX SFP 1310nm 40km Hi-Optel HSFP-03-1312S-22F module – Hi-optel , The product will supply to all over the world, such as: Cannes, Puerto Rico, Slovakia, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Carey from France - 2018.07.26 16:51
We always believe that the details decides the company's product quality, in this respect, the company conform our requirements and the goods are meet our expectations.
By Gwendolyn from Jeddah - 2018.06.30 17:29
Write your message here and send it to us
