● SFP Multi-source Package with SC Receptacle
● Up to 2.5Gb/s Data Links
● Up to 20km on 9/125µm SMF 
● Single +3.3V Power Supply
● Hot-Pluggable
● Compliant with ITU-T G.957
● Eye Safety Designed to Meet Laser Class1, Compliant with IEC60825 
● Compliant with Bellcore TA-NWT-000983
● Compliant with SFP MSA Specification
● Operating Case Temperature
Industrial:-40℃~+85℃
● RoHS Compliant Products
				
| 
 Pin  | 
 Symbol  | 
 Name/Description  | 
 Ref  | 
| 
 1  | 
 VEET  | 
Transmitter Ground(Common with Receiver Ground) | 
 1  | 
| 
 2  | 
 TFAULT  | 
Transmitter Fault.Low normal operation,High Fault indication | 
 
  | 
| 
 3  | 
 TDIS  | 
Transmitter Disable.Laser output disabled on high or open | 
 2  | 
| 
 4  | 
 MOD_DEF(2)  | 
Module Definition 2.Data line for Serial ID | 
 3  | 
| 
 5  | 
 MOD_DEF(1)  | 
Module Definition 1.Clock line for Serial ID | 
 3  | 
| 
 6  | 
 MOD_DEF(0)  | 
Module Definition 0.Grounded within the moudle | 
 3  | 
| 
 7  | 
 Rate Select  | 
No connection required | 
 
  | 
| 
 8  | 
 LOS  | 
Loss of Signal indication.Logic 0 indicates normal operation. | 
 4  | 
| 
 9  | 
 VEER  | 
Receiver Ground(Common with Transmitter Ground) | 
 1  | 
| 
 10  | 
 VEER  | 
Receiver Ground(Common with Transmitter Ground) | 
 1  | 
| 
 11  | 
 VEER  | 
Receiver Ground(Common with Transmitter Ground) | 
 1  | 
| 
 12  | 
 RD-  | 
Receiver Inverted DATA out.AC Coupled | 
 
  | 
| 
 13  | 
 RD+  | 
Receiver Non-inverted DATA out.AC Coupled | 
 
  | 
| 
 14  | 
 VEER  | 
Receiver Ground(Common with Transmitter Ground) | 
 1  | 
| 
 15  | 
 VCCR  | 
Receiver Power Supply | 
 
  | 
| 
 16  | 
 VCCT  | 
Transmitter Power Supply | 
 
  | 
| 
 17  | 
 VEET  | 
Transmitter Ground(Common with Receiver Ground) | 
 1  | 
| 
 18  | 
 TD+  | 
Transmitter Non-inverted DATA in.AC Coupled | 
 
  | 
| 
 19  | 
 TD-  | 
Transmitter Inverted DATA in.AC Coupled | 
 
  | 
| 
 20  | 
 VEET  | 
Transmitter Ground(Common with Receiver Ground) | 
 1  | 
Notes: 
1. Circuit ground is internally isolated from chassis ground. 
2. Laser output disabled on TDIS >2.0V or open, enabled on TDIS <0.8V. 
3. Should be pulled up with 4.7k – 10kohms on host board to a voltage between 2.0V and 3.6V. 
MOD_DEF(0) pulls line low to indicate module is plugged in. 
4. LOS is open collector output. Should be pulled up with 4.7k – 10kohms on host board to a voltage between 2.0V and 3.6V. Logic 0 indicates normal operation; logic 1 indicates loss of signal.