1000BASE-SX SFP 850nm 550m Hi-Optel HSFP-24-3832M-22F module

Short Description:

Gigabit Ethernet

1x Fiber Channel

Switch to Switch Interface

Switched Backplane Applications

Router/Server Interface

Product Detail

Product Tags

Features

● Compliant with Specifications for IEEE802.3Z
● Multi-Source Package with Duplex LC Connector
● Up to 1.25Gb/s Data Links
● Multimode Fiber 850nm VCSEL
● Single +3.3V Power Supply
● Hot-Pluggable
● Compliant with Bellcore TA-NWT-000983
● Eye Safety Designed to Meet Laser Class1, Compliant with IEC60825-1
● RoHS Compliant Products

Specification

Electrical and Optical Characteristics: (Condition: Ta=TOP)

Parameter	Symbol	Min.	Typical	Max.	Unit
Transmitter Differential Input Volt	+/-TX_DAT	200		2400	mV p-p
Supply Current	I_CC		130	180	mA
Tx_Disable Input Voltage – Low	V_IL	0		0.8	V
Tx_Disable Input Voltage – High	V_IH	2.0		Vcc	V
Tx_Fault Output Voltage – Low	V_OL	0		0.8	V
Tx_Fault Output Voltage – High	V_OH	2.0		Vcc	V
Receiver Differential Output Volt	+/-RX_DAT	600		1400	mV p-p
Rx_LOS Output Voltage- Low	V_OL	0		0.8	V
Rx_LOS Output Voltage- High	V_OH	2.0		Vcc	V

Transmitter Section

Parameter	Symbol	Min.	Typical	Max.	Unit
Data Rate	B	-	1.25	-	Gb/s
Centre Wavelength	λc	830	850	860	nm
Output Spectral Width	△λ	-	-	0.85	nm
Average Output Power	P_o	-9.5	-	-3	dBm
Extinction Ratio	EXT	9	-	-	dB
Data Input Voltage-High	V_IHS	V_cc-1.16	-	V_cc-0.89	V
Data Input Voltage -Low	V_ILS	V_cc-1.82	-	V_cc-1.48	V
Supply Current	I_CC	-	90	130	mA
Output Optical Eye	Compliant with IEEE802.3Z
Receiver Section:
Parameter	Symbol	Min.	Typical	Max.	Unit
Receive Sensitivity	P_min	-	-	-17	dBm
Maximum Input Power	P_MAX	-3	-	-	dBm
Signal Detect Threshold-De-Assert	S_D	-	-	-18	dBm
Signal Detect Threshold-Assert	S_A	-30	-	-	dBm
Hysteresis	-	-	2.0	-	dBm
Output High Voltage	V_OH	V_cc-1.03	-	V_cc-0.89	V
Output Low Voltage	V_OL	V_cc-1.82	-	V_cc-1.63	V
Operating Wavelength	λc	770	-	860	nm
Supply Current	I_CC	-	80	110	mA

Absolute Maximum Ratings (TC=25℃)

Parameter	Symbol	Remarks	Min.	Max.	Unit
Storage Temperature	T_ST	-	-40	+85	℃
Operating Temperature	T_IP	X=1	0	+70	℃
Operating Temperature	T_IP	X=2	-40	+85	℃
Input Voltage	T_CC	-	0	+5	V

Recommended Operating Environment

Parameter	Symbol	Remarks	Min.	Typical	Max.	Unit
Supply Voltage	V_CC	-	+3.0	+3.3	+3.6	V
Operating Temperature	T_OP	X=1	0	-	+70	℃
Operating Temperature	T_OP	X=2	-40	-	+85	℃

Timing Characteristics

Parameter	Symbol	Min.	Typical	Max.	Unit
TX_DISABLE Assert Time	t_off		3	10	usec
TX_DISABLE Negate Time	t_on		0.5	1	msec
Time to initialize include reset of TX_FAULT	t_int		30	300	msec
TX_FAULT from fault to assertion	t_fault		20	100	usec
TX_DISBEL time to start reset	t_reset	10			usec
Receiver Loss of Signal Assert Time (off to On)	T_A, RX_LOS			100	usec
Receiver Loss of Signal Assert Time (on to off)	T_d, RX_LOS			100	usec